1. Main switch
A main switch is the power control of the entire cabinet. According to the current, you can choose an air switch such as a miniature circuit breaker. Generally speaking, not only PLC electrical control cabinets have such a switch, but other complete cabinets also have a main incoming line switch.
2. PLC
This is the core. The cost of PLC electrical control cabinets lies in this, and the high price is also expensive because of this component. PLC should be selected according to the needs of the project. For example, if the project is small, it can be directly an integrated PLC, but if the project is relatively large, it may require a module or card type, and may also require redundancy (that is, two sets of alternating use).
3. Power supply
A 24VDC switching power supply. Most PLCs come with a 24VDC power supply. Of course, whether to use this switching power supply depends on whether it is really needed.
4. Relay
Generally, PLC can directly send instructions to the control loop, but it may also be transferred by a relay first. For example, if the output port of your PLC is powered by 24VDC, but the node that needs to be supplied by the PLC in the diagram of your control loop is 220VAC, then you must add a relay to the output port of the PLC, that is, the relay will act when the command is issued, and then connect the node of the control loop to the normally open or normally closed point of the relay. It is also based on the actual situation to choose whether to use a relay.
5. Terminal blocks
This is definitely an indispensable thing for every cabinet, and it can be configured according to the number of signals.
If it is just a simple PLC control cabinet, basically these are enough. If you need other things in your control cabinet, you can increase them according to the situation. For example, you may need to power some on-site instruments or small control boxes, so you may have to increase the number of air switches. Or if you want the PLC to be connected to the host computer, you may need to add a switch or something. It depends on the specific situation. The configuration is different depending on the power environment and requirements, but the above are the basic components of the PLC electrical control cabinet.
