Product Description
The iRelay60-E Integrated Protection and Control Device is designed for the protection and measurement control of various electrical equipment in medium and high voltage power systems (such as simple feeders, distribution transformers, etc.), featuring a comprehensive set of protective functions.
Key Features
High-End Configuration
Equipped with a high-performance embedded microcontroller (integrated with DSP instructions), a design scheme where the bus does not exit the chip; high-capacity, high-speed non-volatile memory chips, and a Chinese interface.
Comprehensive and Reliable Protective Functions
The device is equipped with a full range of protective functions that are reliable and respond quickly.
Specialized Protective Setting Inquiry
Only the active protections are displayed, facilitating users to view the protective settings as a whole and saving commissioning time.
Long-Term Fault Recording
The protective action can initiate a long-duration fault recording (maintained for over 10 years even when power is off), and waveforms can be read and displayed by the upper computer for fault analysis.
Large-Capacity Event Logging
With 256 high-capacity categorized event logs (time resolution of 1ms).
Complete Remote Control and Central Signal Output Functions
The switch can be controlled through communication ports, panels, and input quantities.
Fully Enclosed Metal Case
Dust-proof and with strong resistance to static electricity, electromagnetic interference, and mechanical vibration, the EMC performance is superior.
Reasonable Device Structure
Facilitates easy installation, wiring, and commissioning.
Specification
|
Rated Voltage |
220VDC/AC, 110VDC/AC, 48VDC, 24VDC (selectable) |
|
Power Consumption |
≤5W |
|
Nominal Voltage |
100V (Line Voltage), 100V (Auxiliary Voltage) |
|
Overload Capacity |
1.4Un continuous operation, 2Un allowed for 10s |
|
Power Consumption (per phase at rated) |
≤0.5VA |
|
Nominal Frequency |
50/60Hz |
|
Rated Current |
5A, 1A |
|
Rated Zero Sequence Current |
1A |
|
Overload Capacity |
2In continuous operation; 10In allowed for 10s; 40In allowed for 1s |
|
Power Consumption (per phase at rated) |
≤1VA for 5A rated, ≤0.5VA for 1A rated |
|
Input (DI) |
External excitation 220V/110V DC/AC, 24V/48V DC (selectable), resolution 1ms |
|
Output (DO) |
Contact rating: 8A continuous; 30A for 0.2s; Operating time: <10ms; Return time: <5ms; Break capacity: 250V AC/DC, 0.2A, L/R=40ms |
|
Communication Port RS-485 |
1 channel, Modbus-RTU |
Hot Tags: comprehensive protection and control unit, China comprehensive protection and control unit manufacturers, suppliers, factory, electricity kwh meter, Comprehensive Protection and Control Unit







